Posted on

How to paint metal chains

If you are planning to paint a metal chain, you will need to consider two important factors. First, the metal surfaces are nonporous, the paint will not adhere to them until they have been treated with a type specific primer abrasive. In addition, because of the interlocking chains, painting the surface will be under constant pressure because the metal components rub against each other. You will have to select a type of resistant paint or the finish will wear out quickly.

Instructions

  1. Put the chain on a concrete surface on the outside.
  2. Clean the metal chain with water under pressure. Let it dry completely.
  3. Place it on a high-strength cloth or on a piece of cardboard. Apply a very thin layer of gravure primer to the chain. Its meticulous work to make sure all the metal is covered. Move the chain to expose all surfaces.
  4. Leave to dry for 1 hour, turn the chain around and apply the primer on the other side. Leave to dry for 4 hours.
  5. Apply two coats of spray paint to the metal chain in the same way as you did before. Allow 2 hours of drying between layer and layer.

Tips & Warnings

  • For added durability, apply a lightweight metal coating to help protect the finish.
  • If you want to paint a small chain, like jewelry, do not use engraving primer. Instead, fill a container with 1 cup of metal paint, and dilute with 1 oz. (29,574 cm 3) of mineral spirit. Soak the chain in the paint diluted for 20 minutes. Place the string on paper towels to dry and repeat this process until the string is the desired color.
Posted on

How to paint melamine with spray

Melamine is a resin made by the man that, when heated and placed in a mold, becomes a very durable plastic, but still flexible when cooled. It is used for things like countertops, tableware and kitchen. It is mainly used as cover end on furniture or wood fiber products shelves, but tends to be made in a few colors or prints similar to natural wood. Painting melamine is not as easy as painting some other materials because of its very smooth surface. Preparation for successful aerosol painting on melamine is required.

Instructions

  1. Clean the surface of the melamine with a damp sponge to remove any dust, dirt and other debris. For any sticky or greasy build up on melamine, add a few drops of liquid soap to a bowl of water and soak the sponge before cleaning. Allow the surface to dry completely.
  2. Fleet very fine sandpaper (grain 220 to 240) on the melamine to scrape the material and make it easier for the paint to adhere. Remove the dust from the sanding with the damp sponge and let the melamine dry.
  3. Place plastic sheets on the floor and place two pieces of wood on the top of the plastic. Place the melamine on the pieces of wood and spray an even layer of primer over the top and ends. Allow the primer to dry according to the drying times that appear on the can.
  4. Lift the piece of melamine and place waxed paper on the wood to prevent melamine from sticking to the wood. Place the primed side of the melamine on the wax paper and the wood, and spray the second side with primer. Let it dry completely.
  5. Spray the melamine with a uniform layer of enamel paint on the top and ends. Remove any paint that is dripping with a clean, dry cloth to stop the formation of drops on the edges. Let it dry for about an hour and then check carefully to make sure there are no areas with less paint. Apply a second coat if necessary and then let it dry for the interval that appears on the container.
  6. Put new strips of wax paper and spin the melamine to spray on the second side in the same way. Do not move or melt the melamine for at least 12 hours to allow the paint to heal completely.
Posted on

How to paint leopard stains

You can use a leopard print to decorate just about anything, from clothes to a baby’s room. The leopard print is a fun and daring design that can turn a common piece of furniture or walls into something that exudes style and drama. Although you can cover most surfaces with leopard print fabric, you can also paint these stains yourself. Painting them is also convenient for large areas or you cannot put cloth on top. There are a variety of techniques you can use to add leopard spots to your decor.

Instructions:

Buy the stencil of the repeated pattern of leopard spots at an art and craft store. Uses black or dark brown paints to delineate the stain; Make the border as thick or thin as you want. Use a lighter color, such as light brown or tan, to fill the center of the spots. You can also use a single color for the spots, if you want.

Cut a marine sponge to create leopard spots. Cut the sponge with scissors, giving the desired size to your stains. Soak the sponge in black or brown paint and apply the paint by gently pressing with the sponge. Apply more paint as the sponge needs it. Cut another smaller sea sponge to create centers of leopard spots. Once the paint is dry in the first spots, soak the smallest sponge in the lighter paint and apply it to the centers of the first spots.

Paint the stains freehand, soaking a small brush in black or dark brown paint to create the edge of the spots. Choose a brush size that will achieve the stains you want. For example, if you want small, thin spots, use a small thin brush. Leopard spots are usually imperfect circles; some parts of the circle will protrude more than others, or the circle may resemble a triangle of smoothed corners. Use your imagination to create spots, or look at the photo of a leopard to inspire you. It varies the thickness of the edges of the spots. Use a small paintbrush soaked in lighter color paint to fill the spots.

Posted on

How to paint interior cement floors

Painting cement floors is an affordable home improvement that can give an interesting look to a room in a few days. Compared to installing wood floors, tile or carpet, painting a cement floor can be done for a fraction of the cost and requires less work. With proper preparation of cement before painting followed by careful application of all materials, an ordinary cement floor can be transformed into a design element to complement any room.

Instructions

Thoroughly clean the cement surface. Clean any substance or material that is stuck to the floor with the spatula and sweep the floor completely. The home improvement website recommends removing any oil or grease from the cement by applying cat litter and a hard bristle brush to rub the area with trisodium phosphate (TSP). Rinse the floor and let it dry for several days.

Repair cracks or gaps by applying patches for concrete or using hydraulic cement. Use the brush to apply the adhesive into the crack or hollow before applying the concrete patch mixture to the area, according to Dixieline ProBuild. Use a metal spatula to soften the concrete patch and let it dry according to the manufacturer’s instructions.

Glue the tape to paint the bases around the perimeter of the room to protect it from primary paint, paint and sealant.

Apply the primary paint for cement. Ask a professional in a store for the right type to use on cement floors. Use the roller to apply the paint to the entire surface and let it dry for the time indicated by the manufacturer.

Use a clean roller with a long handle to apply paint to the floor in thin layers. Home Improvement recommends applying two to four layers for durability and a more consistent color, allowing the floor to dry between layers.

Apply the sealant to protect the floor. Apply the roller to the entire surface of the cement floor. Use a mask to avoid inhaling gases. Apply a second layer of sealant after the first one has completely dried.

Tips & Warnings

  • Use primary paint and paint in a well-ventilated room to avoid inhaling gases.
  • Ask a professional to make sure the paint is compatible with concrete and consider floor additives to make the surface less slippery.
  • Use a mixture of concrete patches prepared for minor repairs.
  • Use a brush, not the roller, to paint the floor around the bases.
  • Use a clean and new roller when applying primary paint, paint and sealant.
  • Always start painting at the farthest point of the door and do the work in the direction of the exit to avoid getting trapped in a corner.
Posted on

How to paint furniture red

One way to refresh the look of an old piece of furniture is to paint it again in a daring color like red. Painting a piece of furniture is a simple task, as long as you know what techniques to use for the particular type of furniture. If the piece is made of wood, plastic or vinyl, you can paint it red without much fuss if you use the right type of paint.

Instructions

  1. Prepare a work area by placing newspapers or a plastic tarp over a large area that has a lot of ventilation, such as a garage or patio.
  2. Prepare wood furniture for painting by sanding with a 200 grit sandpaper. To prepare plastic or vinyl furniture, wipe them with a soft cloth to remove all dust.
  3. Shake a can of red spray paint that has been formulated specifically for the surface you are painting. Hold the nozzle 6 inches away from the surface and spray in gentle circular motions to apply a uniform coating. Do not apply an excessive amount to get the tone you want; this will only make it drip. Instead, allow the layer to dry completely and then add another layer.
  4. Let the paint dry. Spray a layer of a clear acrylic sealant on the furniture so that the paint fades and becomes chipped.
Posted on

How to paint fabric chairs

Paint the fabric of an old chair, discolored or stained to give it a new look. While you can reupholster the chairs with new fabric, fabric painting existing paint special or a mixture of fabric paint is usually a cheaper alternative and less time consuming. Refreshes the seat of an old chair painted a mural or choosing a colored solid paint to completely change the fabric.

Instructions

  1. Clean the seat of the chair to remove any dust or dirt.
  2. Mix equal quantities of satin latex paint with medium for fabric. Add water that is about one-half the amount of paint.
  3. Remove the fabric seat or cushion from the seat of the chair to prevent paint from falling on other parts of the chair and moisten the cloth with a water spray.
  4. Apply three thin layers of paint in the direction of the grain of the fabric or make a design of different colors. Uses the solid paint method for more professional looking results. Rub any balloon with sandpaper in the direction of the grain.
  5. Let the paint dry completely.
  6. Mix equal amounts of acrylic paint with medium cloth. Add a few drops of water.
  7. Paint a thick layer of acrylic paint in the direction of the grain of the fabric, softening it while you work.
Posted on

The colors to paint a house

If you have in mind to remodel your house you should know that one of the most important aspects when it comes to remodeling is to choose the colors of the painting. Without a doubt, painting your home generates a very pleasant renewal sensation, but you must be clear which are the tones that most combine with the style and decoration of your house. Here I will give some tips for you to discover how to choose colors for painting a house and make it a place that looks great.

The color therapy teaches how different shades of colors affect your emotions and how you can make harmony decorate every corner of your home with the appropriate colors.

Believe it or not, the colors will affect you psychologically and physiologically; they have direct effects on your body as well as on your mood. Therefore, it is basic and essential to choose the right colors in your home, especially those that dominate the walls as these surfaces are larger and, therefore, the most amount of color possess.

To the room

For the most advisable Room is used warm colors , such as shades ground, paintings with touches of yellow, gray, and even a touch of red. These are warm colors that encourage sociability, I recommend using the light colors on the walls and imposing some touches of color on the accessories that are there, and this way you can change and renew the space with much more ease.

If you wish, you can paint a wall with a strong and predominant color, but without painting the whole space so that it does not look so dark and reduced.

For the kitchen

In the kitchen you can choose to wear orange and yellow colors, even with some hints of red, this will open a little more appetite. Also the Provencal colors, which are milder versions of the primary colors, are suitable for the kitchen.

For dining

As for the dining room, being a stay is usually integrated into the room or the kitchen, you must coordinate and complement your color with such stays.

To the bathroom

In the bathroom should prevail colors that provide sufficient breadth and clarity to it as such: beiges, vanilla, light blue or blue green water? It is also valid to use slightly more intense blue tones, this will create a relaxed and welcoming climate.

To the bedroom

Being a stay for rest the bedroom should convey peace, serenity and promote relaxation. Therefore the most recommended colors to paint it must be cold as violet, green or blue. Also ideal are the grays and browns not so dark, as they create a serene and elegant atmosphere.

On the other hand, the pastel shades of any color, which transmit sweetness and delicacy, are best suited for children’s rooms; so it would be most appropriate to incorporate touches of color into furniture, textiles and decorating accessories.

Seek harmony between color and light

Natural light

The choice of colors in your home depend on the natural light that it receives in each room. In dark rooms, light colors will be your allies and much more if these are warm, glossy or glossy tones.

 Artificial light

Lamps and bulbs greatly influence the appreciation of the colors of the house. Cold lights such as bluish, flatten objects; the warm ones, for example: the reddish and yellowish ones, contribute volume and relief.

The furniture

To achieve this effect of harmony in decoration, furniture should keep a close relationship with the color you’ve chosen for the walls. In small spaces you should combine them with the same color of the walls and thus diminish the visual load.

Practical tips on paint for your house

Before painting

Test with various colors of paint on the wall and see how they change during the day, according to the natural light they receive and under the effect of artificial light. This way you will avoid surprises.

Make testing

The websites of some paint manufacturers have very practical virtual tools to test colors and combinations, in addition, they also offer you their professional advice.

Once tone paint you like chosen notes proportions mix colors. Only in this way you can repeat the exact color if you need to use more paint.

Surfaces

Cannot just renew your walls changing the paint color. In the same way you can renew your furniture with specific products for wood, concrete, plastic, metal, cement and ceramics.

You know all this already have all the necessary knowledge of how to choose colors for painting a house do you dare to do? Remember that once your walls are painted you must clean them constantly so that they remain in all their splendor to the work!

Posted on

How to build a paint cabin

A paint booth has two main functions: leave the dust particles out and keep the paint spray inside. In order to achieve an original finish, it is mandatory to have an isolated area where to paint. Consider the following steps to learn how to build a paint booth.

Instructions

  1. Find a suitable area, you can use your garage if you have one. If so, the work will be easier. You must have four fixed walls in which to place the plastic slats. The garage probably already has a light source. You should protect the lights of the spray paint. If you do not have a garage or do not want to use it as a paint booth, proceed as follows.
  2. Build a booth in such a way that it fits the size of your project. You can use racks and place them together to form the cabin. Make sure they are level and matching in size. You probably want to use some 2 x 4 to have enough weight and be stable. Add some feet to the base so it can stand on its own. The foot walls will allow you to use one as a door as well as being able to pass the extension cables that cover the needs of electric power. This training will allow you to mount the cabin when you need it and save it in sections when you do not use it.
  3. Cover with plastic. After you’ve tested the walls for correct size and stability, it’s time to put the plastic roll strips around the frames. This will leave the dust off and spray the paint inside.
  4. Decide on a floor to work on. If you do not care about the floor on which you will mount the cabin, do nothing. If you want to protect the area, a few sheets of wood will do.
  5. Cover the roof. Once the walls are in place, use a ladder to cover the roof with plastic roll slats. This part can be done better if you have a friend to help you stretch the plastic along the ceiling. If the cabin is too long to cover, build a frame to put on top and then cover it. Make the roof only slightly longer than the cabin, then place support angles to hold it.
  6. Brighten it up. If natural light is not working, use portable floor lights. These, with the walls and the ceiling armed in sections, will make your painting booth easy to assemble and dismantle as it suits you.

Tips & Warnings

  • You should have enough extra material to hand in case of errors or poor calculations.
  • A cabin like the one described in this article is only to paint occasionally. For professional painting, you must build a cabin that covers the permits and requirements established by your city. These codes will vary depending on where you live.
  • For your health, always wear a mask and appropriate clothes to sand or paint.
  • If you set lights in the cab, make sure they are not near plastic or other flammable materials. Turn them off when you do not use them. Do not leave the cab with lights on if you do not use it.
Posted on

How to add textures and mix with acrylic paint

Adding texture and mix with the painting acrylic. Working with this painting produces a result similar to oil. Acrylic paint is based on water, so it does not smell like oils and comes in different densities and shades. Add texture and mix colors is easy to do with acrylic paint.

Instructions

Achieve textures with acrylic paint

  1. Use different paint tools such as spatulas or sponges. You can extend the acrylic paint or stamp it on the canvas to create different textures. A flat side provides thick lines or cuts of thin lines.
  2. Find unusual objects to create textures. Objects such as leaves, branches or rocks create unique patterns and textures with thick acrylic paint if you press the object against wet paint.
  3. Mix additives with acrylic paint to change the texture. Thick gel pumice leaves a crumbling effect like sand, where a clean tar gel creates a thin, thin stream texture. The soft gels produce pear-like textures of egg white and a matte thickens the density.
  4. Add natural elements like sand or small stones, to acrylic paint.

Mixture with acrylic paint

  1. Start painting the first color on the canvas. If you have a large surface to paint, you may prefer to paint by sections.
  2. Wash your brush with water and dry it with a paper towel or cloth.
  3. Add the second color to the canvas. Once you reach the first color, the paint will begin to blend naturally, so start painting away from your first color.
  4. Keep the paint moist. If you cannot work fast enough, add an acrylic gel retarder to the paint on the palette or spray the canvas and paddle with a layer of water to prevent it from drying out.
Posted on

Acrylic paint techniques for copper tones

Painting still life is a skill that requires practice to achieve a credible level of realism. Many beginners find paint metals and reflective surfaces as the most difficult part of making still lifes. You may be tempted to buy a tube of glossy metallic paint, but it will make your paint look fake. Instead, you can mix metallic colors like copper with basic colors and techniques.

Base color

Instead of trying to blend a copper color, you can mix the different colors you see. Look at the object and look for the primary color or the middle tone. The tone of this color is based on the environment and light of still life, so it is hot or cold. It starts with a neutral brown as natural shade and adds ocher yellow and cadmium red to make it a warm color. To get a cool color, you can add red cadmium and cobalt blue to yellow ocher. Try to clarify the color using mostly yellows and only use small amounts of white titanium. To darken the color, do not use black, better add dark blue and brown.

Low light

After finding the base color, mix and apply a color with low light in the area of ​​copper where the shadow is. This low light painting is also hot or cold, depending on the environment. Mix red cadmium and cobalt blue to make a purple. Adjust the quantities by adding more red for a warm color or more blue for a cool color. Neutralize the purple slightly adding yellow ocher or bright Indian yellow. A neutral purple-gray accent will highlight the orange tons of copper.

Lighting Points

The lighting points will make the copper stand out and give it an effect in three dimensions. Look for the color that is lighter in copper. The highlights of copper are usually very orange, so start mixing cadmium red, Indian yellow and some white titanium. To make the orange tone cooler, you can add small amounts of cobalt blue to neutralize it.

Reflected color

Most copper surfaces are very reflective, so if you have other still-life colors, they will look like copper. Look for any color in the copper that you have not yet mixed, such as greens, roses or blues. Mix a small amount of that color and add it to the base color to highlight the areas you think you may need.

Technique

Use a soft brush, like a saber, to apply the paint to the canvas. This will keep the copper surface smooth as metal. Apply the base color, then the low lights and mix in areas of reflected color. Add highlights at the last minute to keep colors from getting muddy.